Perform Indicator for Steel Grade 42CrMo, Chemical and Mechanical Properties and performance

This article is to give brief introduction for grade 42CrMo, which is one of the most important alloy steel grade for high strength huge bolt in Chinese market, and which is the most common grade in our LT factory. If still more questions, welcome to contact us [email protected]

Alloy Steel   Chinese GB/T 3077 Standard  Grade 42CrMo

Equivalent Grade:

EN Steel Number:  1.7223 1.7225  1.7227 1.3563

EN Steel Name: 42CrMo4

SAE Grade: 4140/4142

DIN: 41CrMo4  42CrMo4 42CrMoS4 43CrMo4

BS 970 : 708M40  708A42  709M40 En19 En19C

UNI: 41CrMo4   38CrMo4(KB)  G40 CrMo4  42CrMo4

JIS: SCM 440   SCM  440H   SNB 7   SCM 4M   SCM 4 

42CrMo steel is a ultra high strength steel which has high toughness, hardenability and bo abvious temper brittleness, low deformation rate after being quenched. Heat-treatment or QT(quenching and tempering) will bring high fragile resistance properties and impact resistance properties. 

ready stock

This photo is our ready stock after heat-treaing process. These products will be applied for ground foundation anchor bolt which need high tensile strength and high pre-stress performance.

 

 

 

 

Chemical Properties

Steel Grade C Si Mn P S Cr Mo
42CrMo 0.38 ~ 0.45 0.17 ~ 0.37 0.50 ~ 0.80 ≤ 0.030 ≤ 0.030 0.90 ~ 1.20 0.15 ~ 0.25

Mechanical Properties:

    • Yield strength: ≥ 930 MPa
    • Tensile strength: ≥ 1080 MPa
    • Elongation: ≥12%
    • Rate of reduction in area: ≥45%
    • Impact absorbing energy: ≥ 63 J
    • Material Brinell hardness: ≤229 (Annealed or high temperature tempered steel rod)
    • Sample blank size: 25mm

What is 42CrMoA?

42CrMo+A represent high level top quality steel. Phosphorus and sulphur composition is much lower than 42CrMo, which means more pure with less impurities. 

Our factory – Anyang Longteng Heat Treatment Material Co.,Ltd provide customer 42CrMoA-LT, which means much higher performance than GB/T 3077 standard. In this way, after heat-treatment,  product properties will be better. 

Contact me to get Mill Test Certificate [email protected]  Ms. Cora Tsao

Our Heat-treatment Production Line:

图片5

 

 

 

 


Post time: Feb-18-2019